1993-95 Mazda RX-7 Performance Parts : Intake Weber

: Intake - Weber : K/N Air Filter Assembly Weber 48/51 IDA

K/N Air Filter Assembly
Weber 48/51 IDA

RB Part Number: 16625

K&N
56-1210

Price: $170.00

Qty:

Addtional Photos - Select to Enlarge

Facebook Share

K/N Air Filter Assembly
Weber 48/51 IDA

This simple and well-designed K&N Air Filter Assembly Kit (K&N Part Number 56-1210) has proven to be extremely popular with 48 IDA and 51 IDA owners. The kit cleanly accommodates a high-flow K&N filter element onto the Weber 48/51 IDA carburetor. The kit contains lower and upper chromed, stamped steel mounting plates; sealing gaskets; a filter element; and installation instructions. Adequate clearance is provided for remounting the 48 IDA Air Horns inside of the filter element. If the kit is used with the 51IDA Air Horns you will need to trim material away from the upper flared portion of each Air Horn

By using the K&N Recharger Kit, the filter can be cleaned, re-oiled, and reused almost indefinitely.

Authorized K&N Filter Dealer

Prop65Warning

Customers who bought the above item also often bought:

Accelerator Cable Linkage - 48/51 IDA (Bell Crank)

Accelerator Cable Linkage - 48/51 IDA (Bell Crank)

The Accelerator Cable Linkage (bell crank style) is compatible with the Weber 48IDA and 51 IDA carburetors and is intended for Left-Hand drive rotary chassis using a Left-Hand drive-configured manifold. This linkage mounts to the end of the throttle shaft... Accelerator Cable Linkage - 48/51 IDA (Bell Crank)

Weber Carburetor - 48 IDA Down Draft

Weber Carburetor - 48 IDA Down Draft

Both the elegant design and the simplicity in the maintenance of the Weber 48 IDA Carburetor have proven to be compelling reasons as to why the Weber name has remained so popular over the years. This Weber 48 IDA unit is primarily suited for various... Weber Carburetor - 48 IDA Down Draft

Weber Intake Manifold 48/51 IDA - 74-85 12A Rotary Engines

Weber Intake Manifold 48/51 IDA - 74-85 12A Rotary Engines

Weber Intake Manifold - 48/51 IDA Carburetor 1974-85 12A Rotary Engines The cast-aluminum Weber Intake Manifold is intended for use with a Weber 48 IDA or the Racing Beat-modified 51 IDA carburetor on a 1974-85 12A rotary engine. Imported directly... Weber Intake Manifold 48/51 IDA - 74-85 12A Rotary Engines

Phenolic Intake Spacers - 48 IDA & 51 Weber IDA Carb

Phenolic Intake Spacers - 48 IDA & 51 Weber IDA Carb

The Weber 48/51 IDA Phenolic Intake Spacers can be installed under a 48/51 IDA carburetor to increase the intake manifold length for special applications. Test have shown that up to three spacers per barrel can be used to move the torque peak down about... Phenolic Intake Spacers - 48 IDA & 51 Weber IDA Carb

Go to Racing Beat Home Page
Select: Go to Shopping Cart