Mazda RX-8 Performance Parts : Clutch/Pressure Plate
Customers who bought the above item also often bought:
Exhaust Manifold Air Injection Cover Plate - 04-11 RX-8
The Air Injection Cover Plate for the RX-8 is intended to block the opening in the Mazda OEM Factory exhaust manifold, or Racing Beat header, that remains if the emissions air injection tube is not being utilized. This simple cover plate is held in... 
Stock Flywheel Puller Tool
The Stock Flywheel Puller Tool will remove any stock Mazda flywheel from its taper press fit on the eccentric shaft once the flywheel nut is loosened. This easy-to-use tool is a "must have" for any serious rotary mechanic!
Transmission Throwout Bearing - 87-88 TURBO II
The original throwout bearing normally does not require replacement unless it has been abused in some way. However, if it has been making noise, such as a whirring sound when the clutch pedal is depressed, or if the slave linkage has run out of clearance,...
Transmission Seal Kit - 87-88 TURBO II
We recommend replacing the transmission front seal and rear seal kit when re-installing the transmission to reduce the risk of leakage. The primary reason for leaks seems to be the large loads that are placed on the input shaft when re-installing the...
Repair Manuals & Books
